Effect of agitation mode (mechanical, ultrasound and microwave) on uranium sorption using amine- and dithizone-functionalized magnetic chitosan hybrid materials - IMT Mines Alès Accéder directement au contenu
Article Dans Une Revue Chemical Engineering Journal Année : 2021

Effect of agitation mode (mechanical, ultrasound and microwave) on uranium sorption using amine- and dithizone-functionalized magnetic chitosan hybrid materials

Résumé

Magnetic chitosan nanoparticles, activated by glycidyl methacrylate, can be functionalized by grafting diethylenetriamine (DETA) and dithizone for improving U(VI) sorption at pH around 5. The physicochemical properties of the materials have been characterized by a wide variety of analytical techniques. Uranyl sorption increases with the pH (progressive deprotonation of amine and sulfur groups). Uptake kinetics are controlled by the agitation mode: the equilibrium time is reduced while using ultrasonic treatment (especially at highest frequency: 80 kHz): the cavitation effect improves the accessibility to internal reactive groups (sorption capacity is increased). The diffusivity coefficient is increased by 4–5 times. In the case of microwave, the sorption capacity is significantly reduced (especially for R-Dithizone, down to 0.8 mmol U g−1) because of temperature increase, which limits the sorption (exothermic mechanism). Mass transfer is tremendously enhanced: equilibrium time is less than 60 s (30 min for ultrasonic treatment and 120 min with mechanical agitation). Sorption capacity at monolayer saturation (Langmuir) decreases with increasing the temperature from 2.20 to 1.74 mmol U g−1 for R-Amine (from 1.77 to 1.22 mmol U g−1 for R-Dithizone). The sorption enthalpy is close to −19.7 kJ mol−1 for R-Amine (with positive entropy change, ΔS°) and −34.2 kJ mol−1 for R-Dithizone (negative ΔS°). Metal desorption is highly efficient using 0.3 M Na2CO3 /0.1 M H2O2 solution. Metal desorption is instantaneous (less than 1 min) and complete when using microwave treatment. The ultrasonic treatment allows improving desorption efficiency and decreasing the concentration of the eluent compared with mechanical agitation. The process is successfully applied for uranyl separation from the leachates of marine sediments, especially in the presence of Complexon III (masking agent).
Fichier principal
Vignette du fichier
effect-of-agitation-mode.pdf (2.04 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03123901 , version 1 (28-01-2021)

Identifiants

Citer

Khalid Elwakeel, Mohammed Hamza, Eric Guibal. Effect of agitation mode (mechanical, ultrasound and microwave) on uranium sorption using amine- and dithizone-functionalized magnetic chitosan hybrid materials. Chemical Engineering Journal, 2021, 411, pp.128553. ⟨10.1016/j.cej.2021.128553⟩. ⟨hal-03123901⟩
113 Consultations
264 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More